Xerox B210, Service Manual

Page: 28 / 142

July 2019
2-7 Xerox® B210 Service Manual
07-130
Status Indicator RAPs Initial Release
07-130 Paper Jam in Tray 1 RAP
BSD-ON: BSD 1
A paper jam has occurred in Tray 1.
Initial Actions
• Remove jammed paper from Tray 1 area. Refer to Section 7: Troubleshooting, in the
Xerox® B210 User Guide for detailed instructions on clearing paper jams.
• Clear the paper path of any debris or obstructions.
• Ensure the loaded paper is within machine specifications. Refer to Section 6 General Pro-
cedures for product specifications.
Procedure
Remove Tray 1 and ensure that guides are set correctly. The paper is loaded correctly in
the tray.
Y
N
Align the paper in Tray 1 then reinsert the tray.
Check the position of the jammed sheet. The lead edge reached the Retard Roll.
Y N
Check for 3.3 VDC on the Feed Sensor PWB. The voltage is present at the connector
on the Feed Sensor PWB.
Y
N
Check for 3.3 VDC on the Main PWB. The voltage is present on the Main PWB.
Y N
Verify all voltages are present between the HVPS PWS and the Main PWB.
The voltages between the HVPS PWB and the Main PWB are present.
Y
N
• Install a new HVPS PWB, PL 4.1 Item 2 .
• Install a new Main PWB, PL 1.1 Item 7 .
Install a new Feed Sensor PWB, PL 4.4 Item 20 .
Install a new Feed Sensor PWB, PL 4.4 Item 20 .
Install a new Feed Sensor PWB, PL 4.4 Item 20 . The clutch engages.
Y N
Check for 24 VDC on the Paper Feed PWB. The voltage is present at the con-
nector on the Paper Feed PWB.
Y
N
Check all voltages are present between the HVPS PWB and the Main PWB.
The voltages between the HVPS PWB and the Main PWB are present
Y
N
• Install a new HVPS PWB, PL 4.1 Item 2 .
• Install a new Main PWB, PL 1.1 Item 7 .
Install a new Feed Sensor PWB, PL 4.4 Item 20 .
Install a new Feed Clutch, PL 4.1 Item 5 .
Perform SCP Final Actions.
Remove any jammed paper. Check the following for wear or damage and install new compo-
nents as required:
•
Paper Feed Roll Assembly, PL 4.5 Item 11 .
• Paper Drive Roll, PL 4.5 Item 9 .
A
A
B
B
C
C