Xerox B210, Service Manual

Page: 68 / 142

July 2019
4-15 Xerox® B210 Service Manual
REP 4.3, REP 4.4
Repairs - Adjustments Initial Release
REP 4.3 Feed and Registration Clutches / Paper Feed PWB
Parts List on PL 4.1
Removal
1. Switch off the machine, then disconnect the power cord.
2. Remove the Left Side Cover, REP 2.2 .
3. Remove the Paper Feed PWB. Figure 1 :
a. Disconnect three connectors on the Paper Feed PWB.
b. Remove the screw, then remove the Paper Feed PWB.
4. Remove the Feed Clutch, Figure 1 :
a. Disconnect CN2 on the Paper Feed PWB.
b. Remove the E-ring and Washer from the Feed Clutch.
c. Remove the Feed Clutch.
5. Remove the Registration Clutch, Figure 1 :
a. Disconnect CN1 on the Paper Feed PWB.
b. Remove the E-ring and Washer from the Registration Clutch.
c. Remove the Registration Clutch.
Figure 1 Feed and Registration Clutches / Paper Feed PWB
Replacement
Replacement is the reverse of the removal procedure.
REP 4.4 Transfer Roll
Parts List on PL 4.1
Removal
1. Open the Front Cover Door.
NOTE: Cover the Drum Cartridge with several sheets of paper to prevent it from being light
shocked.
2. Remove the Toner Cartridge and the Drum Cartridge.
3. Remove (squeeze and lift) the Transfer Roll Retainer Clip, Figure 1 .
Figure 1 Transfer Roll Retainer Clip
Paper Feed PWB
CN2
CN1
Registration Clutch
Feed Clutch
Screw
Transfer Roll Clip