manualshive.com logo in svg

Xerox 8290, User Manual, Page: 87 / 152

Share
Download
Xerox 8290 User Manual Download Page 87

4 Printer Operation 

8265/8290/8365/8390 User Guide 

79 

4.3.5.6 Longstore Menu  (8365/8390 Only) 

 
When storing the printer for longer than 5 days, ink cassettes with 8365/8390 Cleaning liquid should be 
installed. For more details, please refer to maintenance cycle. 
 

 

 

Setup items 

Parameters 

Description 

No 

Do not perform a long store 

Yes 

Perform the long store procedure. 

Longstore 

- 

• [CANCEL] key: shift to the previous hierarchy 
menu. 

 
The process consists of several cleaning loadings, several air loadings and one ink loading.  On the 
display of the operation panel a time indication is mentioned on the fourth line. 
 

Message 

Time 

1. 

Please remove cart. 

2. 

Ink Discharge 

3. 

Please insert Cleaning cart. 

4. 

During washing wait for a while 

5. 

Ink not filled [ALL] 

6. 

Power OFF 

29 

 

 

 

 

 Notes   

 

When a cleaning cassettes is empty during LongStore procedure, remove the empty one and replace it by a 
new one. Only the last cycle will be repeated. Although, the full time (29 minutes) is mentioned again on the 
panel. 

 

 
After powering OFF the machine, the tubings in the waste bottle should be mounted on the nipple plate at 
the bottom of the machine. This to prevent air is coming in the ink system which will dry out the heads. 
 

 

 

1 

Nipple plate 

 
How to load ink after a long store procedure?  
 

Summary of Contents for 8290

























































































































































Reviews:

No comments