Xerox 8290, User Manual, Page: 147 / 152

7 Adjustments
8265/8290/8365/8390 User Guide 139
7.3.3 Modify the Step Adjust Printer Setting
Step 1 :
At the Control Panel press the
Cancel
button until Control Panel Screen displays “
Ready to
Print
”.
Step 2 :
Press
F1 Cut&Feed
.
Step 3 :
Press
F2 Dist. Adj.
.
Step 4 :
Change the Step Adjust Printer Setting:
a. If the Dist. Check Test Pattern has OVERLAP, as shown in Print 1, then you need to
increase the Step Adjust Printer Setting. To do this:
i. Press the
F2 Key
to increase the Step Adjust Printer Setting %.
ii. Then press
ENTER
.
iii. Repeat 7.18.1 and 7.18.3 until there is no visible OVERLAP between the
different passes in the test pattern.
b. If the Dist. Check Test Pattern has a GAP, as shown in Print 2, then you need to
decrease the Step Adjust Printer Setting. To do this:
i. Press the
F4 Key
to decrease the Step Adjust Printer Setting %.
ii. Then press
ENTER
.
iii. Repeat 7.18.1 and 7.18.3 until there is no visible GAP between the different
passes in the test pattern.