manualshive.com logo in svg

Xerox 8290, User Manual, Page: 58 / 152

Share
Download
Xerox 8290 User Manual Download Page 58

4 Printer Operation 

50 

8265/8290/8365/8390 User Guide 

4.3.1.16 Dist. Adj Menu 

 

To perform various settings for media feed compensation 

 

 

 

 

 Notes   

 

For details of the distance adjustment, refer to "Distance adjustment". 

 

 

 

 

Setup items 

Parameters 

Description 

Print1 

Performs printing by media feed compensation.  A correction pattern with 
a width of ± 0.20% (in steps of 0.10 %) is printed around the centre of the 
correction value currently set. 

Change 

Changes the media feed compensation value. 
The menu changes to the Change Media Feed Correction Value menu. 

Print2 

Performs printing by media feed compensation (for fine adjustment).  A 
correction pattern with a width of ± 0.02% (in steps of 0.01%) is printed 
around the centre of the correction value currently set. 

Dist.Adj 

- 

[CANCEL] key: Shifts to the previous hierarchy menu. 

 

4.3.1.17 Change menu 

 

Change the distance adjustment value. 

 

 

 

Setup items 

Parameters 

Description 

Change 90.00%-<100.00%>-110.00% 

Changes 

the media feed compensation value by 

operating the following keys. 
• [F2] key: to increase the setup value. 
• [F4] key: to decrease the setup value. 
• [ENTER] key: to confirm the setup value  
• [CANCEL] key: to cancel the setup value 

 

Summary of Contents for 8290

























































































































































Reviews:

No comments