manualshive.com logo in svg

Xerox 8290, User Manual, Page: 28 / 152

Share
Download
Xerox 8290 User Manual Download Page 28

3 Printer Setup 

20 

8265/8290/8365/8390 User Guide 

 

 

 

 

 

Notes

   

 

When the printer is ON, the power LED is lid green. Push the power button again to turn off the machine. 
 

 

 

 

 

 

Step 3 : 

Following message is displayed for 3 seconds on the operation panel. 

 

 

 

 

 

Notes

   

 

If pressing the [POWER] key on the operation panel by mistake, press the [POWER] key again while the 
following message is displayed.

 

 

 

 

 

Step 4 : 

The product will perform the power OFF operation. 

¾

  Following message is displayed on the operation panel. 

 

 

 

¾

  All lamps and the LCD of the operation panel will turn OFF. 

 

¾

  The product will automatically turn the power OFF after performing a tubing flush. 

 

 

 

 

 

Notes

   

 

If there are problems during the power OFF operation, the unit will display a message on the operation 
panel, and the operation may stop.  If the operation stops, refer to “Troubleshooting” and take the 
appropriate actions.

 

 

Summary of Contents for 8290

























































































































































Reviews:

No comments