Xerox 8290 User Manual Download Page 84

Page: 84 / 152

4 Printer Operation

8265/8290/8365/8390 User Guide

4.3.5 Setup Menu 5/7

4.3.5.1 DataDump Menu

To perform dump printing for online function check.

Parameters

Description

Notes

Dump printing is used by service persons to check the functions of the
printer. Do not use this function for normal printing.

Start/End

All

DataDump

• [CANCEL] key:
• To exit Dump Mode.
• To shift to the previous hierarchy menu.

4.3.5.2 InkManager Menu

Setup items

Parameters

Description

Head Wash

To perform a head cleaning.

Ink Load

To load ink.

InkManager
(1/2)

Ink Change

To change ink configuration (2x4

→

1x6)

LongStore

To store your printer for a long time. (8365/8390 Only)

InkSupply

To switch between the Bulk Ink System for 8365/8390 and
ink cassettes.

ChipMgr

To switch between cassette and printer mode

InkManager
(2/2)

• [CANCEL] key: shift to the previous hierarchy menu.

Summary of Contents for 8290

























































































































































Search results

Summary of Contents for 8290

Reviews:

Xerox 8290, User Manual, Page: 84 / 152

Search results

Summary of Contents for 8290

Reviews: