Xerox 721P85530, Description

Page: 81 / 488

CREATING A JOB SOURCE LIBRARY (JSL)
XEROX DOCUPRINT 180 LPS PDL REFERENCE 3-23
Registration shift and skew
The registration of a printed image can appear shifted or skewed on
a page if the sheet of paper is misaligned as it enters the printer.
Because of the design of the LPS feeder, the image registration on
each page can vary slightly both horizontally and vertically by up to
.05 inches/1 mm. The image can also be slanted or skewed slightly
by up to .05 inches/1 mm in opposite directions, for a maximum skew
of 0.1 inches/2 mm. Refer to figures 3-4 and 3-5.
Note: The following figures are the same specifications merely
rotated to show portrait and landscape orientations. The shift and
skew variances described here are within allowable specifications
but, as this can affect the registration of variable data in preprinted
forms and the placement of images close to the edge of the page, it
is important to make allowance for this condition.
Figure 3-4. Landscape orientation shift and skew