Xerox 721P85530, Description

Page: 107 / 488

SPECIFYING INPUT PARAMETERS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 4-19
RECORD command
Table 4-22 summarizes the use of the RECORD command
parameters.
The following sections describe the syntax of the command
parameters and explanations of the parameter options.
ADJUST
This parameter specifies an adjustment value added to or subtracted
from the contents of the record length field to determine the true
record length.
Syntax RECORD ADJUST = option(s)
Options Table 4-23 lists the parameter option(s) and definition(s).
Table 4-22. Summary of RECORD command parameters
Parameter Specifies Offline Online DJDE
ADJUST Record length adjust value Y N N
CONSTANT Record termination code Y N N
FORMAT Length field recording mode Y N N
LENGTH Maximum logical record length Y Y N
LMULT Multiplication factor to determine record length Y N N
LTHFLD Length of field containing record length Y N N
OFFSET Location of record length field Y N N
POSTAMBLE Length of extraneous data at end of record Y N N
STRUCTURE Input record structure Y N N
Table 4-23. ADJUST parameter option(s) and definition(s)
Option(s) Definition(s)
value Specifies the record adjustment length. It is a
constant integer added to or subtracted from the
value in the length field of every record. The range of
a value is -127 to 127 and must be no greater than
length. The first character may be plus (+) or minus
(-).
The default is 0.