manualshive.com logo in svg

Xerox 721P85530, Description

Share
Download
Xerox 721P85530 Description Download Page 225

PRINT FORMAT COMMANDS

XEROX DOCUPRINT 180 LPS PDL REFERENCE

6-59

COLLATE

This parameter specifies whether pages are to be collated or 
uncollated.

Syntax

OUTPUT COLLATE = 

option(s)

Options

Table 6-38 lists the parameter option(s) and definition(s).

Refer to the “Points to note” section in this chapter for additional 
information.

COPIES

This parameter specifies the number of report copies to be printed.

Syntax

OUTPUT COPIES = 

option(s)

Options

Table 6-39 lists the parameter option(s) and definition(s).

Table 6-39.

COLLATE parameter option(s) and definition(s)

Option(s)

Definition(s)

YES

Specifies that the output pages are collated

The default is YES.

NO

Specifies that the output is not collated. If 
DUPLEX=YES, then COLLATE=NO is ignored.

Note that if NTO1=YES, PDL overrides 
COLLATE=NO with COLLATE=YES and notes this 
action with a warning in the JSL.

Table 6-40.

COPIES parameter option(s) and definition(s)

Option(s)

Definition(s)

number

An integer value with range 1 (the default) to 32767. 
For the copies DJDE parameter, a value of 0 may be 
specified for the DJDE COPIES parameter, in which 
case no copies are printed. The copies parameter on 
the START command allows an operator to override 
this parameter when initiating a print job.

The default is 1.

Summary of Contents for 721P85530









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands