Xerox 721P85530, Description

Page: 120 / 488

SPECIFYING INPUT PARAMETERS
4-32 XEROX DOCUPRINT 180 LPS PDL REFERENCE
TCODE command
The TCODE command defines a set of input-character-to-type
assignments to be used for the masked string comparisons in a
report. It must be used whenever it is not possible to use one of the
standard sets of default type assignments without modification.
Table 4-37 summarizes the use of the TCODE command
parameters.
The following sections describe the syntax of the command
parameters and explanations of the parameter options.
The TCODE command should be coded as follows:
•
Specify with one parameter, using the DEFAULT parameter, an
initial set of type assignments for the entire set of input
character codes.
•
Modify the specified initial set of type assignments by
associating specific character types with specific characters in
the input character set (as many occurrences as necessary of
the TASSIGN parameter).
•
If necessary, further modify the initial set by disassociating
specific character types from specific characters in the input
character set (as many occurrences as necessary of the
TRESET parameter).
Table 4-37. Summary of TCODE command parameters
Parameter Specifies Offline Online DJDE
DEFAULT Initial set of character type assignments for use with
masked comparisons Y Y N
TASSIGN Association of one or more specified characters with
one or more specified typecodes Y Y N
TRESET Disassociation of one or more characters, or all
characters, in a set from one or more typecodes Y Y N