Xerox 490ST - Document Centre B/W Laser Printer System Administration Manual Download Page 246

Page: 246 / 322

Page 19 - 6

Xerox Document Centre System Administration Guide

Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.

Click the Properties tab or click Properties in the directory
tree.

Select Services, then select Distribution Templates in the
directory tree.

Select Repository Setup in the directory tree.

Select Fax Repository 0 from the Repository List drop-down
list.

Select NetWare for Protocols.

Type the name of the repository server in Server Name.

Type the name of the server volume (NetWare 3.x, 4.x, 5.x
(IPX only)) in Server Volume.

Type the context and tree (NetWare 4.x, 5.x (IPX only)) for the
repository in NDS Context and NDS Tree.

10. Type the path for the repository in Directory Path.

11. Type the Login Name and Password for the repository.

Retype the password to verify it in Retype Password.

12. Click Apply New Settings to accept the changes or Restore

Settings to return the settings to their previous values.

Summary of Contents for 490ST - Document Centre B/W Laser Printer



































































































































































































































































































































Search results

Summary of Contents for 490ST - Document Centre B/W Laser Printer

Reviews:

Xerox 490ST - Document Centre B/W Laser Printer, System Administration Manual, Page: 246 / 322

Search results

Summary of Contents for 490ST - Document Centre B/W Laser Printer

Reviews: