21.
Send a print job to the printer.
22.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer’s
Advanced
Features and Troubleshooting Manual
to correct the problem.
23.
If your print job did not print, see the Troubleshooting section for
your operating system in the
Technical Information Guide
to
correct the problem.
Note
Printers connected to a Windows NT network with TCP/IP
protocol enabled can use a web browser to monitor and
configure your printer. Refer to the section in this document
entitled
Internet Printer Services
.
Note
For installing or managing multiple printers on a Windows
NT network with TCP/IP protocol enabled, you can use the
Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the
Xerox CentreWare MC User Guide
.
Quick install steps (AppleTalk protocol)
1.
At the Desktop, right-mouse-click the Network Neighborhood
icon and select
Properties
.
2.
Click the
Protocol
s
tab and verify that the
AppleTalk
protocol has
been loaded.
3.
If the AppleTalk software is not present, install it using the
documentation provided by Microsoft. Then return to this
document.
4.
Open the
Control Panel
and double-click the
Printers
icon.
5.
Double-click
Add Printer
; the
Add Printer Wizard
starts.
6.
Verify that My Computer is selected and click
Next>
.
7.
Click
Add Port
.
8.
Select the
AppleTalk Printing Devices
and click
New Port
.
9.
Click
Ethernet
and select the device.
10.
Choose your printer device from the list, then click
OK
.
