Dynamic addressing (RARP/BOOTP
1
)
The TCP/IP address is assigned automatically by the Server. Follow
the steps below:
1.
Press
Menu Up
or
Menu Down
until you see:
Menus
Ethernet Menu
2.
Press
Item Up
or
Item Down
until you see:
Ethernet Menu
IP Address Resolution
3.
Press
Value Up
or
Value Down
until you see:
IP Address Resolution
BOOTP/RARP
1
4.
Press
Enter
.
5.
Update the RARP/BOOTP
1
server's
/etc/ethers
or
/etc/bootptab
and the
/etc/hosts
files with a host name, TCP/IP and Network
addresses. Consult your UNIX documentation for more
RARP/BOOTP
1
server configuration details.
6.
Power off the Printer.
7.
Power the printer on and allow time for an IP address to be
assigned by the RARP/BOOTP
1
server (this time may vary
depending on network traffic).
8.
Perform the steps contained in the section of this document
entitled
Appendix A: Print the Configuration Sheet
.
9.
Obtain the TCP/IP address from the Configuration Sheet.
1
RARP is not functional even when selected. Only BOOTP is
functional.
