background image

7 - 46

MicroPDF417 Message Length

Scan the bar codes below to change the message length.  Refer to 

Message Length Description

 (page 7-2) for additional information.  Mini-

mum and Maximum lengths = 1-366.   Minimum Default = 1, Maximum 
Default = 366.

GS1 Composite Codes

Linear codes are combined with a unique 2D composite component to form a 
new class called GS1 Composite symbology.  GS1 Composite symbologies 
allow for the co-existence of symbologies already in use.  

Default = Off.

UPC/EAN Version

Scan the

 UPC/EAN Version On

 bar code to decode GS1 Composite sym-

bols that have a U.P.C. or an EAN linear component.  (This does not affect 
GS1 Composite symbols with a GS1-128 or GS1 linear component.)  
Default = UPC/EAN Version Off.

Note: If you scan coupons that have both UPC and GS1 DataBar codes, you 

may wish to scan and output only the data from the GS1 DataBar code.  
See 

Coupon GS1 DataBar Output

 (page 7-28) for further information.

Maximum  Message Length

Minimum Message Length

On

* Off

UPC/EAN Version On

*  UPC/EAN Version Off

Summary of Contents for 1900





































































































































































































































































































































































Reviews: