XENO XNR44P, User Manual

Page: 13 / 139

11 | Chapter 1 : NVR
3 O
PERATION
3.1 User Log-in
Check the power connection. The system can be used after power-on.
The NVR has various setting categories. The administrator can set the system password and <User> to prevent unauthorized
changes to setting values and alteration of recorded file.
Enter the <Admin> or <User> password which has been set by using the virtual keyboard.
N
OTE
1) <LOGIN> window will be permanently displayed in monitor as above picture until a User logs in with the
right ID and password. The default User ID is ‘admin’ and password is none (No password).
2) If it is set as Auto Log-In, NVR does not require LOG-IN. (Please refer to 4.1.2 User.)
3) Please be sure that the PoE Adapter should be connected to the NVR after the NVR is turned on so that
the IP address can be allocated properly to NVR.
The “HELP” button will help you understand how to setup several important settings, even without the
user’s manual book. For example, if you need help about how to set “Quick Setup”, click “HELP”
button at the right bottom of the ‘Quick Setup’ menu.