XENO XNR44P, User Manual

Page: 50 / 139

User’s Manual | 48
 E-Mail Notify
The system can send notification to an Email address or Advanced Client Software and the Central Management System
over the network. You can choose from a selection of different kinds of alarms by pressing “ADD.” Alarms can be generated
by Sensor, Motion Detection, Disk Full, Admin PW Changed, Video Loss, and Power On/Off. By clicking “Use TLS”, you can
use a public email address such as Yahoo, Google, Hotmail accounts. Type NVR name in the “NVR Name” box. The NVR
name will appear in the email so that you can recognize which NVR sent an email.
N
OTE
Configuration’s first priority is always given to “Schedule Setup” of the “RECORD” menu.
Thus, the system will not send alarm message or email notification upon motion alarm or sensor even
though you tick the checkbox of above event selection, unless you set the “Schedule Setup” in the
“RECORD” menu.
For example, if you set “Continuous” only for “Schedule Setup” of the “RECORD” menu and marks the
“All” checkbox in “REMOTE NOTIFY”, then the system will not send alarm messages. In this case, you
have to set “C + M”, “MOTION”, “SENSOR” or “C+ S” for REMOTE NOTIFY or E-Mail NOTIFY to function
properly.