XENO XNR44P, User Manual

Page: 43 / 139

41 | Chapter 1 : NVR
 Motion Area Setup
The default motion area setup relies on network camera setting and direct control of network camera is supported for
approved models. Choose the desired motion area by dragging a mouse using left button. The whole image or upto 4
individual areas of the image can be selected. To remove all selections made, click the right button on the mouse and choose
‘Clear All’.
Select also “Sensitivity” from ‘Lowest to Highest’.
 Title
You can name the camera title.

Covert
“Covert,” also called ‘hidden camera’ feature, hides camera display and playback as if there were no camera recording. You
can apply this covert function not only to Live view, but also to Playback view.
 Brightness, Contrast, Hue
Adjusting brightness, contrast and hue to camera is available. When setting is done, click the ‘Apply’ button.
 Advanced Setup
“Advanced Setup” can be supported by the approved camera only.
Network Type
Choose DHCP or Static IP. When choosing Static IP, IP address, Subnet Mask and Gateway will be
activated.
IP Address / Subnet Mask / Gateway
Type the IP Address, Subnet Mask and Gateway.