![background image](http://html2.mh-extra.com/html/xebex-fitness/runner/runner_user-manual_3231602004.webp)
4
Press the
ENTER
key to confirm values entered
when adjusting a program. Hold this key for 5
seconds to launch Event (Competition) mode. Hold
Up/Down Keys simultaenously for 5 seconds to exit
Event Mode.
Press the
STOP
key to end a program or pause
the workout. Hold this key for 2 seconds to reset
the console and erase all data.
10. Console Display
•
TIME: 0:00:00~9:59:59 minutes
•
SPEED: 0.0~99.9 km/hr or miles/hr
•
PACE: 0:00~99:59 min/km or min/mile
•
DISTANCE: 0.00~99999.99 Km or miles
•
RPM: 0~999
•
CALORIES: 0~9999.99
•
WATT: 0~9999
•
PULSE: P~30~230; The letter
“P” will be displayed if no heart rate is detected
•
Volume OFF icon;
Volume ON icon
•
Low voltage display
•
Maintenance service notification icon
1.
STANDBY Mode:
Once the batteries are installed into the console, the console will turn on flash Figure 1
and enter STANDBY mode as depicted in Figure 2. “PRESS START” will be displayed on the screen.
STANDBY Mode will automatically time out after ten (10) minutes without activity and the console will turn
off.
2.
SLEEP Mode:
After ten (10) minutes of inactivity, the console will automatically enter SLEEP mode,
depicted in Figure 3.
3.
PAUSE Mode:
During a workout or program, press the START key to enter into PAUSE mode. The
display will read
“PAUSED” as depicted in Figure 4. To return to the previous program, press the START
key again.
CONSOLE MODES
Figure 2
Figure 1
Figure 3