63
Evolve User Manual V1.0 by XDynamics Limited
For executing the waypoint path, select Custom Mode by choosing the middle position on the flight
mode switch and then choose waypoint mode and follow the steps outlined below. By the end of the
execution of the whole plan the drone will hover in position at the last waypoint. Auto mode can be
cancelled at any time by switching back the flight mode switch to the left for GPS mode. The pilot has
full control of the position and yaw angle of the drone during auto flight.
To execute the plan, you may enter the Fly page by following these steps:
1. Navigate to the Smart Pilot System Fly Page.
2. Tap the Flight Mode and change to Waypoints
3. Select the desired plan
4. Smart Pilot System will upload the plan to the drone
5. Tap “Start” to execute
Setting Waypoints
Run Waypoint Plan
