Copyright | NZS Installation and Operation Manual
45
The operator must be a qualified electrician and competent to work on the system. The
capability must be evaluated and approved by XCHARGE.
To ensure operation safety of charging station, regular maintenance to control system
status is necessary. All points bellow should be carried out by trained operator or Xcharger
after-sales colleagues. Before execution, please make sure the system is in a safe condi-
tion and has been powered off.
Check the cabinet door lock (power off)
Operators must be authorized and trained in electrical operating skills. Otherwise, the
operator must not operate the system to avoid improper operation of the equipment and
cause serious injury.
The operator should be fully familiar with the structure and operating principles of the
entire storage system.
The operator should be fully familiar with this manual.
The operator should be fully familiar with the relevant standards of the country where the
project is located.
Personnel entrusted to perform the work are able to assess their assigned tasks and iden-
tify possible risks.
Only authorized and trained electricians should perform maintenance work and change the
settings and connections of the equipment
Check whether the door lock of charger can be opened and closed smoothly (check both
sides)
Check whether the cabinet door opens and closes smoothly (check both sides).
Check whether two windows on back side of ESS open and close smoothly.
Check whether the cabinet door is deformed.
7.2 Maintenance Procedure
Cabinet Inspection
