22
(6)
Turn the Encoder to set the value
of the selected icon. The value se-
lected will show on the digital display.
Refer to Page 25 for instruction and
explanation on MMA parameter
selection and settings
.
(3)
Select DC or AC MMA
Function. Push the MMA button
to make your choice of DC or
AC.
1.
Connecting the Welding Lead Set: Various electrodes require a different polarity for optimum results
refer to the electrode manufacturers information for the correct polarity. Most GP electrodes are
electrode connected to output socket, Earth Connected to the output socket
2.
Turn the power source on using the on/off switch located on the rear machine panel.
3.
Set the MMA weld settings using the MMA weld program on the front panel
(4)
Set the MMA parameters such as
AMP Set, ARC Force etc, by turning the
Encoder Knob until the approriate icon
illuminates.
(2) Turn on the Power source
using the on/off switch at
the rear of the machine
(1) Connect Electrode Lead
the terminal
(1) Connect the Earth Lead
lead to terminal
MMA (Stick Electrode) Welding Setup and Operation
Set Up Procedure for MMA (Stick) Welding:
Razor
32OAC/DC
TIG-MMA
(5)
Push the Encoder
to lock the selected
icon ready for adjust-
ment.
(3) Set the MMA welding parameters
using the MMA Weld Program
Summary of Contents for RazorWeld Razor TIG320 ACDC
Page 7: ...7 Electrical Schematic Diagram Razor32OAC DC TIG MMA...
Page 54: ...54 NOTES...
Page 55: ...55 NOTES...
