WiOS
- 18 -
Out of Range
When the handset is carried out of signal range from the base unit, a warning tone
will be repeated every 5 seconds and the display will update.
OUT OF RANGE
No Link to Base
If the connection from the Wireless Handset is lost, due to a power failure or lost
connection to the telephone system, the display will say “No Link to Base”. This is
an indication that the handset and the base unit are unable to communicate with each
other. To reestablish the link, return to the base unit to make sure that it is operating
correctly. Reestablishing link may take up to 30 seconds.
NO LINK TO BASE
Registration
If the Wireless Handset is not registered to the Base Unit, the LCD display “Please
Register” and not the extension name and number. To register the handset, refer to
the “Troubleshooting” section.
PLEASE REGISTER
Key Lock (Flash / Transfer)
When the Wireless Handset is idle, press the “Flash/Transfer” button for three (3)
seconds to lock and unlock the buttons (keys). This will prevent the handset from
dialing unintended digits. Although the keys are locked, incoming calls can still be
answered by pressing the talk or speaker keys. The “Ç” in the display is the
indication that the handset is locked.
((
)) Ç
WiOS
-
27 -
When set to “Hands free” the user can converse with intercom callers without
pressing any buttons or taking the handset out of the charging base. Central Office
calls still require the handset to be taken out of the base unit, press the Talk or
Speaker Button.
((
))
AUTO PICKUP
HANDSFREE
When set to “Disable” the user must remove the handset from its charging base and
press either the “Talk” or “Speaker” buttons to answer the incoming call.
((
))
AUTO PICKUP
DISABLE
Once the Desired Auto Pick up mode is selected, press the “OK” Button (F3). A
confirmation tone will be heard and the display will update:
((
))
AUTO PICKUP
RECEIVER OK!
