Xblue Networks WiOS, Setup Manual

Page: 21 / 22

WiOS
- 24 -
De-Registration
Occasionally it may be necessary to de-register a handset. Once de-registered, the
handset is no longer considered part of the system. To de-register a handset, select
“De-register” fin the programming menu and press “OK” (F3).
(( ))
> DE-REGISTER
VIBRATION
Select “Yes” to begin the de-registration process.
(( ))
> DE-REGISTER
NO?
A (( ))
> DE-REGISTER
YES?
While the de-registration process takes place the following will be displayed:
(( ))
DE-REGISTERING
PLEASE WAIT…
If the de-registration process is successful the display will update and a confirmation
tone will be heard.
(( ))
> DE-REGISTER
OK!
Note: If the procedure fails, please see the Troubleshooting section.
WiOS
-
21 -
Programming Fields
There are six (6) programming fields that can be customized for each Wireless
Handset.
Heading Parameters
Language English , French Spanish
Register
Deregister
Vibration Ring
, Vibrate, Ring and Vibrate
Auto Pick up Receiver , Hands free, disable
Reset Handset
= Default Value
Select the programming parameter from the programming menu by scrolling through
the choices. When the “>” sign is on the parameter to be programmed, press OK
(F3). In the example below, the “Language parameter will be programmed.
(( ))
> LANGUAGE
REGISTRATION
From this point on, the manual assumes that the Wireless Handset is in programming
mode.