X3102r user manual V. 2.0
27 / 33
R1483(r)/ IPoA(i)/ PPPoA(p)/ PPPoE(pe): (select
“p”
for
PPPoA routing)
Ethernet IP (192.168.1.1): (set LAN IP address)
Subnet mask (255.255.255.0): (set mask)
VPI(0-1023): (set VPI value)
VCI(1-65535): (set VCI value)
Authentication(PAP(p)/CHAP(c)/None(n)): (select
authentication method)
User name: (set user name from ISP)
Password: (set password)
Retype password: (reconfirm password)
The following (example) will be displayed for checking your
setting
Setup Configuration
FUNCTION: PPPOA
Ethernet IP: 192.168.1.1
Subnet Mask: 255.255.255.0
# VPI VCI AUTH USERID
1: 7 34 CHAP xavi
Preserve the configuration (y/n): (
“y”
to use the setting
or
“n”
to leave without change. Start again to set
parameters)
Configuration will have no effect until after save and
restart.
All the parameters will not be effective under the setting
being saved and restart again. Above message is to remind
operator.
4.3 NAT function
NAT function will be enabled automatically when PPPoA
routing set. This function will enable PC users in your LAN
environment to access outside with only one IP address (IP
sharing) and one access account.
