X3102r user manual V. 2.0
17 / 33
−
Line delay: 0 milliseconds
−
Character line feeds incoming line ends: enable
II. How to Switch between Bridge and Router
Please see the command below for detailed command setting.
MODE
Select the device as Bridge or router mode
Syntax: Mode
Parameters:
The default is bridge mode.
Example: >>mode
The word with background “ “ is prompt following by a
command
>> mode (with “enter” key to execute)
Please select bridge or router:(b/r,b) r (with “enter” key to
execute)
Current mode is router
III. Setting up a Bridge (RFC 1483 bridge)
1. If you are in Router mode, use “mode” command to switch to
Bridge mode before setting parameters.
MODE
Select the device as Bridge or Router mode
Syntax: Mode
Parameters:
The default is bridge mode.
Example: >>mode
The word with background “ “ is prompt following by a
command.