X3102r user manual V. 2.0
10 / 33
VI. Software
Upgrade
You may easily upgrade the
X3102r
embedded software by
obtaining the compressed upgrade kit from the service provider then
following the steps:
!
Extract the ZIP file for updated firmware.
!
Connect
X3102r
via the local Ethernet port or remote DSL
link, make sure the
X3102r
Ethernet IP address and your
terminal are properly configured so that you can
successfully “
ping
”
X3102r
The default local IP address is
192.168.1.1.
!
Under DOS prompt, execute command
“xupgrade <
IP
address of X3102r>
”
, for instance “
xupgrade
192.168.1.1
”.
!
This upgrading process might last as long as 60 seconds.
!
Then reboot
X3102r
with new software.
Note:
Strictly maintain stable power to
X3102r
while upgrading software,
if power failed during the upgrading process, contents in the
memory could be destroyed and the system will hang. In such case
you must call the dealer or system integrator to repair.