Xantrex XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60, Installation Manual, Page: 21 / 146

System Components and Accessories
975-0239-01-01 1–5
This manual for use by qualified personnel only
XW Connection Kit for INV2
The XW Connection Kit for Inv2 (FGA # 865-1020) is the extension kit required for
connecting a second or third XW Inverter/Charger in the same system.
Figure 1-5 XW Connection Kit for INV2
XW Conduit Box
XW Connection Kit includes:
• XW Conduit Box with raceway barriers and cable strap
connections points,
• 3x 60 A, 120/240 Vac, 2-pole, Square-D, Type QOU, Din-Rail
mountable, AC breakers (includes bypass plate)
• #6 AWG AC wiring to connect the inverter to the AC breakers
(includes 4 conduit bushings)
• #2 AWG ground wire
• 4x Power Distribution Bars (replaces factory-installed bars)
• 1x GJ250A 160 Vdc, 3/8" stud DC breaker
• 1x Bus Bar for DC positive
• 1 pair #4/0 AWG battery cables
• AC Sync and Xanbus cables (not shown)
Power Distribution Bars
AC Bypass Plate
60A, 120/240Vac AC Breakers
15/16" bushing for AC sync
and Xanbus knockouts (x1)
1-3/8" bushings for AC Wiring
knockouts (x3)
DC Positive Bus Bar
GJ250A DC breaker
#6 AWG AC Wiring
#4/0 AWG battery cables
#2 AWG Ground Wire