manualshive.com logo in svg

Xantrex XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60, Installation Manual, Page: 100 / 146

Share
Download
Xantrex XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60 Installation Manual Download Page 100

XW System Accessories Installation

5–2

975-0239-01-01

This manual for use by qualified personnel only

The XW System Control Panel

The XW Series Inverter/Charger can be controlled remotely by connecting a XW System 
Control Panel. The XW System Control Panel is optional for single inverter systems. The 
XW System Control Panel is required for configuring systems with multiple inverters. 
The XW System Control Panel allows access to programming features of the inverter and 
allows the system to be modified to specific installation requirements.

The XW System Control Panel is connected to the inverter through one of two Xanbus 
ports.

The XW System Control Panel is designed to be wall mounted (see “Mounting the XW 
System Control Panel” on page 5–3), and requires no connections other than the network 
cables or terminators that plug into the back of the unit.

Because you cannot access the XW System Control Panel network inputs after the unit is 
mounted, the network cables need to be routed through the wall and connected before 
securing the XW System Control Panel.

See Chapter 3, “Xanbus Network Installation”, for more information about installing a 
Xanbus-enabled device as part of a network-managed power system.

Figure 5-1

XW System Control Panel Xanbus Port Locations

Summary of Contents for XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60



















































































































































Reviews:

No comments