manualshive.com logo in svg

Xantrex XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60, Installation Manual, Page: 108 / 146

Share
Download
Xantrex XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60 Installation Manual Download Page 108

XW System Accessories Installation

5–10

975-0239-01-01

This manual for use by qualified personnel only

Installing the XW Automatic Generator Start

Installation 
Overview

Installing the XW Automatic Generator Start involves the following steps:

1. Mounting the unit.

2. Connecting the wiring harness to:

•

the generator (page 5–13)

•

thermostats (optional) (page 5–14)

•

external shutdown switch (optional) (page 5–14)

•

external ON/OFF switch and LED (optional) (page 5–15)

3. Connecting the wiring harness to the 20-contact connector on the XW Automatic 

Generator Start.

4. Connecting the XW Automatic Generator Start to the XW System Control Panel and 

other network-enabled devices (page 5–17).

Figure 5-8

XW Automatic Generator Start External Connections

Wiring harness (connection 
to generator, thermostats, 
and external switches)

Network cables to other 
Xanbus-enabled devices

20-contact 
connector

Network ports

Important:

Because each installation varies according to the location, the type of generator, 

and the overall complexity of the Xanbus system, these instructions can offer only general 
guidelines for the many installation options available.

WARNING: Shock Hazard

Before installing the XW Automatic Generator Start as part of a pre-existing Xanbus system, put 
the system in Standby in order to disable the electrical operation of networked devices. See the 
Automatic Generator Start Owner’s Guide for instructions on putting the System in Standby.

Summary of Contents for XW4024-120/240-60, XW4548-120/240-60, XW6048-120/240-60



















































































































































Reviews:

No comments