Xantrex XW-SCP 865-1050, Owner'S Manual

Page: 39 / 76

Configuring the XW System Control Panel
975-0298-01-01 3–9
Setting the Device Name
The “Name” setting allows you to customize the name of the System
Control Panel as it is displayed on other screens and menus.
The characters available are:
• A to Z
• a to z
• 0 to 9
• space.
To customize the System Control Panel name:
1. Select Name on the SCP Setup menu.
2. Press Enter.
The last letter of “SCP” is highlighted.
3. Begin customizing the device name.
• To change the character, press the up or down arrow button. Holding
down the button causes the characters to scroll more quickly.
• To delete the character, press Exit.
• To add characters, press Enter.
4. When the correct character is shown, press Enter to select it.
5. After pressing Enter to select the last character of your customized
device name, press Enter again to return to the Setup menu.
Note:
Increasing the number of letters in a device name may cause other text
on the same line to run off the edge of the screen. Device names should be
limited to 10 characters or less.
SCP: Setup
[70%]
[60%]
[Off]
[SC
P ]