![background image](http://html.mh-extra.com/html/xantrex/xw-scp-865-1050/xw-scp-865-1050_owners-manual_881357033.webp)
Configuration Using the System Control Panel
975-0298-01-01
3–3
System Status Screen
The System Status screen appears after the Startup screen. The System
Status screen displays aggregated status information for the entire power
system. A single system may have up to three Xanbus™ network-
connected XW Inverter/Chargers, up to two XW Solar Charge
Controllers, one XW-Automatic Generator Start module and one XW
System Control Panel all connected to a single battery bank, a single
generator and a common utility grid.
The System Status screen always features a “Menu” arrow pointing to the
Enter button. Pressing Enter displays the Select Device menu.
Figure 3-1
System Control Panel
Top Level
Screens
Startup screen
System
Status screen
System Status
Select Device
menu
Select Device
XW
Inverter/Charger
Home screen
XW6048:Home
Device 2
Home screen
Device 2:Home
Device 3
Home screen
Device 3:Home
Device n
Home screen
Device n:Home
Appears for a few seconds after the system starts up
or when the system has been reset.
Press Enter to
view Select
Device menu.
Select device from
list and press Enter
to view Device
Setup menu.
Press Enter from a Device Home screen
to view the Device Setup menu.
Press Exit from a Device Home screen to
return to the System Status screen.
The number of Home screens depends on
the number of Xanbus-enabled devices
installed in the system.
Summary of Contents for XW-SCP 865-1050
