Xantrex XTR 100-8.5 Operating Manual Download Page 109

Page: 109 / 286

Analog Programming Mode

M370046-01

4-17

Resistive-Controlled Current APG Setup

To activate APG current mode using an external resistor source:

1. Turn the mode control knob to the CAP position to press the Rotary

knob/Enter button if the control knob is already at CAP position.

CAPr

is displayed on the output voltage display.

2. Turn Rotary knob/Enter button to select

Rn1S

(voltage source from

non-isolated connector).

3. Press the rotary knob/Enter button to commit the selected mode.

LE C

is displayed on the output voltage display.

4. Once the desired level has been selected, press the Rotary knob/Enter

button to commit the change.
The display will return to the normal display.

Deactivating APG Current Mode

To deactivate the APG current mode:

1. Turn the mode control knob to the CAP position or press the Rotary

knob/Enter button if the control knob is already at the CAP position.

CAPr

is displayed on the output voltage display.

3. Turn the Rotary knob/Enter button to select

nonE

4. Press the rotary knob/Enter button to commit the change.

The display will return to the normal display.

All manuals and user guides at all-guides.com

Summary of Contents for XTR 100-8.5































































































































































































































































































Search results

Summary of Contents for XTR 100-8.5

Reviews:

Related manuals for XTR 100-8.5

Brands by name

Popular brands

Xantrex XTR 100-8.5, Operating Manual

Search results

Summary of Contents for XTR 100-8.5

Reviews:

Related manuals for XTR 100-8.5

Brands by name

Popular brands