![background image](http://html1.mh-extra.com/html/xantrex/watt-series-programmable-dc-power-supply-xg/watt-series-programmable-dc-power-supply-xg_operating-manual_3351669142.webp)
Remote Operation
5-16
M370078-01
Multiple Power Supply Setup
Master Setup:
◆
Configure the master XG by selecting the communication interface
you wish to use to communication with the Master and follow the
setup instruction in this chapter.
Slave Setup:
1. Turn the 9-position mode control to PGM.
rE
is displayed in the output voltage display.
2. Turn the rotary Adjust/Enter control to select
SLA
and press the Enter
button.
3. Set a unique address. See “Multichannel Address Setting” on page 5–
21.
Important:
If either RS-232 or RS-485 are used for communication with the
master, the data rate must be configured for 9600 bps to properly communicate
with the slave units.
Summary of Contents for Watt Series Programmable DC Power Supply XG...
