![background image](http://html1.mh-extra.com/html/xantrex/watt-series-programmable-dc-power-supply-xg/watt-series-programmable-dc-power-supply-xg_operating-manual_3351669123.webp)
Isolated Analog Programming Mode (ISOL)
M370078-01
4-31
4
Resistive-Controlled Current ISOL Setup
Activating ISOL Resistive-Controlled Current Setup
1. Turn the 9-position mode control to the CAP position or press the
rotary Adjust/Enter control if the control knob is already at the CAP
position.
CAPr
is displayed on the output voltage display.
2. Turn rotary Adjust/Enter control to select
R IS
(voltage source
from isolated connector).
3. Press the rotary Adjust/Enter control to commit the selected mode.
LE C
is displayed on the output voltage display.
4. Select the input source level using the rotary Adjust/Enter control.
5. Once the desired level has been selected, press the rotary Adjust/
Enter control to commit the change.
The display will return to the normal display.
Deactivating ISOL Current Mode
To deactivate the ISOL current mode:
1. Turn the 9-position mode control to the CAP position or press the
rotary Adjust/Enter control if the control knob is already at the CAP
position.
2.
CAPr
is displayed on the output voltage display.
3. Turn the rotary Adjust/Enter control to select
nonE
.
4. Press the rotary Adjust/Enter control to commit the change.
The display will return to the normal display.
Summary of Contents for Watt Series Programmable DC Power Supply XG...
