![background image](http://html1.mh-extra.com/html/xantrex/watt-series-programmable-dc-power-supply-xg/watt-series-programmable-dc-power-supply-xg_operating-manual_3351669010.webp)
Safety
viii
M370078-01
Standard Warnings
1. Before installing and using the XG 850 Watt Series Programmable
DC Power Supply, read all instructions and cautionary markings on
the XG and all appropriate sections of this Manual.
2. The XG is for indoor use only. Do not expose the XG to moisture. To
reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Be sure to install the XG in a compartment which allows air
to reach the ventilation inlets on the front and rear of the unit to
prevent overheating. For more information, see “Ventilation” on
page 2–4.
3. To avoid a risk of fire and electric shock, make sure that the existing
wiring is in good condition and the wire is not undersized. Do not
operate the XG with damaged or substandard wiring.
4. Do not operate the XG if it has received a sharp blow, been dropped,
or otherwise damaged in any way. If the XG is damaged, see
“Warranty and Product Information” on page WA–1.
5. Do not disassemble the XG. It contains no user-serviceable parts. See
the “Warranty and Product Information” on page WA–1 for
instructions on obtaining service. Attempting to service the XG
yourself may result in a risk of electrical shock or fire. Internal
capacitors remain charged after all power is disconnected.
6. To reduce the risk of electrical shock, disconnect AC power from the
XG before attempting any maintenance or cleaning or working on
any circuits connected to the XG. Turning off controls will not reduce
this risk.
WARNING: Keep these instructions
This chapter contains important safety and operating instructions. Read and keep
this Operating Manual for future reference.
Summary of Contents for Watt Series Programmable DC Power Supply XG...
