![background image](http://html.mh-extra.com/html/xantrex/gt2-8-au-qc-230/gt2-8-au-qc-230_owners-manual_881406009.webp)
975-0466-01-01
vii
Important Safety Instructions
1. Before installing and using the GT Inverter, read all instructions and cautionary markings on the
inverter and in all appropriate sections of this guide.
2. To reduce shock, fire, and energy hazards the installation must be in accordance with all applicable
local installation codes. It is the installer’s responsibility to ensure adherence to applicable codes.
3. To reduce risk of fire hazard, do not cover or obstruct the heat sink.
4. Observe the clearance recommendations as described on page 2–12. Do not install the GT Inverter in a
zero-clearance or non-ventilated compartment. Overheating may result.
5. Use only accessories recommended or sold by the manufacturer. Doing otherwise may result in a risk
of fire, electric shock, or injury to persons.
6. To avoid a risk of fire and electric shock, make sure that all wiring is in good condition and that wire is
not undersized. Do not operate the GT Inverter with damaged or substandard wiring.
7. Do not operate the GT Inverter if it has received a sharp blow, been dropped, or otherwise damaged in
any way. If the GT Inverter is damaged, see the Warranty section.
8. Do not disassemble the GT Inverter. It contains no user-serviceable parts. See Warranty for
instructions on obtaining service. Attempting to service the GT Inverter yourself may result in a risk of
electrical shock or fire and will void your warranty.
9. To reduce the risk of electrical shock, disconnect both AC and DC power from the GT Inverter before
attempting any maintenance or cleaning or working on any circuits connected to the inverter. Turning
off controls will not reduce this risk. Internal capacitors remain charged for up to 30 minutes after
disconnecting all sources of power.
10. The GT Inverter must be provided with an equipment-grounding conductor connected to the AC
ground.
WARNING: Save these instructions
This manual contains important safety and operating instructions. Read and keep this
Owner’s Manual for future reference.
WARNING: Limitations on use
Do not use this GT Inverter in connection with life support systems, medical equipment,
or where human life or medical property may be at stake.
Summary of Contents for GT2.8-AU-QC-230
