![background image](http://html.mh-extra.com/html/xantrex/gt2-8-au-qc-230/gt2-8-au-qc-230_owners-manual_881406050.webp)
Wiring the Inverter
3–12
975-0466-01-01
Network Components
Terminators
Network terminators (Figure 3-9) are required at both ends of the network to
ensure the communication signal quality on the network. Network terminators are
inserted into a GT Inverter RJ45 (Xanbus) port. The GT Inverter comes with one
network terminator pre-installed.
GT Inverter Xanbus
ports
Two RJ45 ports are provided on the GT Inverter for making network connections.
See Figure 3-10 for the location of these ports.
CAUTION: Unpredictable network operation
Do not exceed the maximum total Xanbus network length shown in Table 3-2, “Total
Xanbus Network Length” on page 3–11. Proper network operation cannot be guaranteed
when these distances are exceeded.
Important:
When creating long Xanbus networks (i.e. greater than 100 m), you must
verify network integrity using a CANbus network analysis tool such as the Maretron
N2KMeter Diagnostic Tool for NMEA2000 compatible networks. See “Verifying the
Xanbus Network” on page 3–15.
Figure 3-9
Network Terminator
Figure 3-10
Location of Xanbus RJ45 Ports
RJ11 ports
(not used)
Xanbus
RJ45 ports
RS-232 port (used to connect a PC to
use GT-View. See page 3–16.)
Summary of Contents for GT2.8-AU-QC-230
