![background image](http://html1.mh-extra.com/html/xantrex/freedom-sw-series/freedom-sw-series_owners-manual_3223631082.webp)
68
Freedom SW Owner’s Guide
Configuring the Freedom SW using the SCP
Stacking Configuration Menu
The
Stacking
menu configures the Freedom SW to operate
as a part of a multi-unit installation.
When installing a stacked system, every setting on the
Stacking
menu (except for
Dev Name
) must be configured for
each Freedom SW in the system. The settings should be
configured in the following order:
•
Dev Number
•
Stack Mode
Figure 32
Stacking Menu Screen
IMPORTANT:
Accessing this menu automatically places the Freedom SW
in standby mode. When entering the
Stacking
menu, the unit identifies itself
by flashing all front panel LEDs. After exiting the
Stacking
menu, the
Freedom SW returns to operating mode and the front panel LEDs stop
flashing.
NOTE:
The same
Battery
number and
AC In
number must be used for
all stacked Freedom SW units.
FSW3012 00: Stacking
Dev Name
Dev Number
Stack Mode
AC In
Battery
[00]
[01]
[Master]
[SHORE1]
[Batt1]
[*Master] [Slave] [L2Master]
[*SHORE1] [SHORE2
to
5] [GEN1
to
5] [None]
Table 17
Stacking Menu Description and Values
a
Item
Description
Default
Range
Dev
Name
Allows the customizing of
the default name for the
inverter/charger. This setting
is optional and does not
affect operation. See “Setting
the Device Name” on page
70.
FSW3012
in the case
of
Freedom
SW 3012.
Can be
changed by
the user.
Dev
Numbe
r
Allows setting of a unique
unit number in a two-unit
system. See “Setting the
Device Number” on page 71.
00
00
–
31
FSW Owners Guide.book Page 68 Tuesday, August 7, 2018 9:03 AM
Summary of Contents for Freedom SW Series
