![background image](http://html1.mh-extra.com/html/xantrex/freedom-sw-series/freedom-sw-series_owners-manual_3223631089.webp)
97-0019-01-01
75
Configuring the Freedom SW using the SCP
To store the state of the inverter to memory:
1. Press and hold the
STBY/ON Fault Clear
button on the
SCP for more than five seconds to switch to Standby
(Power Save) mode.
2. Select
Advanced Settings
on the SCP. See “To select
the Advanced Settings menu screen:” on page 53.
3. On the
Advanced Settings
menu, select
Adv
Features
.
4. On the
Advanced Features
menu, select
StoreInvState
.
5. Press
Enter
and use the Up and Down arrow buttons to
change the setting to
Enabled
.
6. Press
Enter
again to choose the selection.
7. Press
Func
until you return to the
System Status
screen.
8. Press and hold the
STBY/ON Fault Clear
button on the
SCP for more than five seconds to switch back to
Operating mode.
FSW Owners Guide.book Page 75 Tuesday, August 7, 2018 9:03 AM
Summary of Contents for Freedom SW Series
