![background image](http://html1.mh-extra.com/html/xantrex/freedom-sw-series/freedom-sw-series_owners-manual_3223631039.webp)
97-0019-01-01
25
Operating the Freedom SW with the SCP
NOTE
: All functions on the front panel can also be controlled
from the SCP.
Figure 8
Xanbus System Control Panel (SCP)
2
1
4
3
10
9
8
7
5
6
Item Description
1
AC In/Charge
LED indicates that qualified AC is
present at the input of an inverter/charger. When the
Freedom SW is connected to a qualified AC source
like the utility grid or a generator, this LED on the
SCP turns on.
2
Inverter On
LED turns on when the Freedom SW
is inverting using battery power.
3
Low Battery
LED
turns on when the battery
voltage on the Freedom SW is low.
4
Fault
LED
indicates a detected condition that
requires user attention and intervention. The Fault
LED turns on when any Xanbus-enabled device
connected to the network detected a fault. See
“Detected Fault Types” on page 88 for the
definitions of a fault and warning.
5
STBY/ON Fault Clear
button is used to clear
active faults on the system if pressed momentarily.
It also toggles all Xanbus-enabled devices on the
system between Operating and Standby (Power
Save) mode when held down for more than five
seconds. See “Inverter Operation Using the Front
Panel” on page 18.
FSW Owners Guide.book Page 25 Tuesday, August 7, 2018 9:03 AM
Summary of Contents for Freedom SW Series
