28
Freedom Sequence Intelligent Power Manager Owner’s Guide
Circuit Level Advanced Settings
AC Relay Settings
The Freedom Sequence has AC relays
1
that can each be used to control an
AC load up to 15 amps. Each AC relay has a unique internal identifier (for
example, Circuit1, Circuit2, etc.) Freedom Sequence allows the AC relays
to be configured with a variety of settings to best manage the AC power on
the system. The following settings can be configured for all AC relays.
•
Circuit Name
•
Load Shed
•
Circuit Type
•
AC Line
•
Priority
•
Reconnect MRGN
DC Relay Settings
The Freedom Sequence has DC relays
2
which can be used to connect and
disconnect DC loads on the system based on battery voltage thresholds. The
following settings can be configured for all DC relays.
•
Circuit Name
•
Load Shed
•
Circuit Type
•
Gen Soft Start
•
Batt Low Trig Set
•
Batt Low Trig Clr
•
Batt High Trig Clr
•
Batt High Trig Set
1.Six AC relays for PN: 809-0912 and four AC relays for PN: 809-0913.
2.Four DC relays for both PNs: 809-0912 and 809-0913.
FSequence IPM Owners Guide.book Page 28 Thursday, October 6, 2011 3:33 PM