10
Freedom Sequence Intelligent Power Manager Owner’s Guide
Circuit Status
In the Circuit Status screens, no item is configurable. This means that the
screens are only useful for up-to-date information on each circuit.
FSPM 00: Circuit Status
1 ACLoad1
1 Last Shed Current
2 ACLoad2
2 Last Shed Current
On 3.0A
2.0A
On 4.5A
4.0A
FSPM 00: Circuit Status
6 ACLoad6
6 Last Shed Current
7 DCLoad7
7 Last Shed Current
8 DCLoad8
8 Last Shed Current
9 DCLoad9
9 Last She Current
10 DCLoad10
10 Last Shed Current
On 3.0A
4.0A
On N/A
5.0A
On N/A
7.5A
On N/A
N/A
On N/A
N/A
1
3
2
4
5
6
7
1
Circuit names can be up to ten characters long. Valid characters are from
a
to
z
,
A
to
Z
,
0
to
9
, symbols '
/
' (forward slash) and '
-
'(hyphen). Spaces, an
underscore, and a period are not accepted symbols. Examples are “
Main-A/
C
” and “
Refrigerat
”.
2
Indicates whether the circuit is currently enabled (
ON
) or not (
Off
).
3
This number corresponds to the AC circuit ID label found on the product,
like
AC 1
is
1
,
AC 2
is
2
, et cetera.
7
to
10
a
refer to the four DC relays.
a.
5
to
8
for the Freedom Sequence four-circuit model PN: 809-0913.
4
Indicates the current (in amps) presently passing through the circuit. It
displays
0.0A
if no AC current is passing through. It will always display
N/A
for all DC relays. See #6 and #7.
5
Last Shed Current
indicates the last value of the current (in amps) for the
circuit before the circuit was shed in a load shedding event.
6
In this example, Circuits 7 and 8 are DC relays controlling AC loads. This
means that both these circuits will each display a
Last Shed Current
value that is dependent on the AC load that each are controlling.
7
In this example, Circuits 9 and 10 are DC relays controlling DC loads. DC
relays that control DC loads are not monitored for amperage, thus, their
statuses are
N/A
and there are no
Last Shed Current
values.
FSequence IPM Owners Guide.book Page 10 Thursday, October 6, 2011 3:33 PM
