Xantrex Automatic Generator, Owner'S Manual

Page: 87 / 124

Setting Quiet Time
975-0082-01-01 4–3
Setting Quiet Time
Use the Quiet Time feature to ensure that the Auto Gen Start will not start
the generator during the night, or during times that might clash with
“Quiet Time” guidelines at RV parks and campgrounds.
Setting Quiet Time for the first time involves three steps:
1. Setting “QT Enable” to On.
2. Setting the “QT Begin” setting.
3. Setting the “QT End” setting.
The default setting for “QT Begin” is 10:00 PM (22:00 if you are using a
24-hour clock) and the default setting for “QT End” is 7:00 AM (7:00 on
the 24-hour clock). If the default settings meet your needs, you only need
to enable or disable Quiet Time when you want to use this feature.
For more information about Quiet Time settings, see “QT Enable” on
page 3–11, “QT Begin” on page 3–11, and “QT End” on page 3–13.
Enabling Quiet Time
Before setting times for the beginning and end of Quiet Time, you must
first enable the Quiet Time feature, if it has not already been enabled.
To enable Quiet Time:
1. On the Auto Gen Start menu, use the up or down arrow buttons to
highlight “QT Enable”.
2. Press Enter.
3. Use the up or down arrow button to select On.
4. Press Enter.
Setting the beginning of Quiet Time
Setting a time for “QT Begin” will define the start of Quiet Time. At the
time you set for “QT Begin”, the Auto Gen Start will turn the generator
off if it is running, and prevent the generator from starting automatically
until the end of Quiet Time.
To set the beginning of Quiet Time:
1. On the Auto Gen Start menu, use the up or down arrow buttons to
highlight “QT Begin”, then press Enter.
2. Use the up or down arrow button to select the hour, then press Enter.