X-Tronic 9010-PRO, Instructions Manual

Page: 11 / 16

- 9 -
MAINTENANCE
Main Unit
1. Keep the unit plugged into a GROUNDED outlet at all times
during operation.
2. Keep the unit and all components free from dirt, debris, and liquid
at all times.
3. Make sure the power cord is plugged in correctly and safely off
the floor to prevent accidents.
4. Keep all cords in the immediate workspace and avoid letting them
hang off the side of a table or bench top.
5. Wipe the unit down with a dry, static-free cloth, as needed.
Desolder Gun
The pressure indicator on the side of the desoldering gun indicates
the suction pressure of the unit. The indicator must be read only when
the unit is at operating temperature and the tip is clear of obstruction.
Observe the indicator while holding the trigger and perform the below
steps if needed.
Normal Attention
Required
Solution
Cleaning of the
desoldering
tip, heating
element, spring
filter, or fiber
filter required
Indicator less
than 50% blue
Indicator is more
than 50% red