X-Tronic 9010-PRO, Instructions Manual

Page: 9 / 16

- 7 -
FUNCTION SETTINGS
Setting Sleep Timer
1. Turn on the power switch.
2. Ensure the desoldering gun is in the holder.
3. Press the * button. The LCD will read “L01”. The “01” indicates the
current sleep time is set at 1 minute.
4. Press the increase/decrease button to set the desired sleep time.
It can be set anywhere from 1 minute to 99 minutes.
NOTE: If you select “00”, this will turn off the Sleep Timer
Option. If the Sleep Timer is turned off, the unit will NOT
go into Auto-Shut Off Mode.
IMPORTANT: This is a safety feature and turning it off is NOT
recommended. Keeping your desoldering gun at the set
temperature when not in use will negatively impact the heating
element life.
5. The unit will automatically save the setting and exit the function
menu after six seconds.
6. The Sleep Timer has now been set.
Setting Auto-Shut Off Timer
1. Turn on the power switch.
2. Ensure the desoldering gun is in the holder.
3. Press the * button twice. The LCD will read “P01”. The “01”
indicates that the auto-shut off time is set to 1 minute.
4. Press the increase/decrease button to set the desired shut off
time. It can be set anywhere from 1 minute to 30 minutes.
NOTE: If you select “00”, this will turn off the Auto-Shut Off
option. This is a safety feature and turning it off is NOT
recommended.
IMPORTANT: The Auto-Shut Off timer starts when Sleep Mode
activates and the unit starts to cool down.
5. The unit will automatically save the setting and exit the function
menu after six seconds.
6. The Auto-Shut Off timer has now been set.