18
How To Remove Front Wheel
1. Remove the two nuts from both sides of the front wheel.
2. Remove the screw from the end of Brake Cable, and then pull the cable out. Then remove the
axle and spacer as shown below.
3. Remove the front wheel.
How To Install Front Wheel
1.
Set your bike on a strong table or workbench to make access easier.
2.
Lift the front forks and install the front wheel. Ensure the locking washers are inserted into
the holes on the forks.
3.
Insert the axle and spacer as shown above (in reverse)
4.
Install the two nuts on the end of the axle and tighten.
How To Remove Hub Motor
1.
Remove the two nuts on each side of the motor.
2.
Remove brake adjustment nut and remove brake cable from brake hub.
3.
Remove brake hub lock nut where it attaches to frame.
4.
Remove axle lock plate by removing the #10 bolt on each side.
5.
Follow the motor wires up under the rear fender, it will connect to quick disconnects and
unplug the cables.
6.
Follow the chain up to the pedal sprocket and move the chain off of sprocket. Use the pedals
