15
Maintenance ----Basic
1.
Your bike comes with a 30amp fuse, pre-installed at the factory and is located inside the
battery box.
2.
Clean Chain Regularly.
3.
Ensure Tires are inflated to 35-45 PSI.
4.
Adjust Brake tension via adjusting screws located at Brake lever or on Brake control
lever.
5.
Ensure regular servicing according to the schedule.
6.
Do not attempt to change any electronic components except changing light bulbs.
7.
DO not attempt to modify, open or perform maintenance on the Hub Motor.
8.
Any attempt to modify or adjustment of electrical components will void the warranty.
Maintenance ----Schedule
Service
Interval
Daily
Monthly
Every
6
Months
Yearly
Inspect Tires for wear and
condition and inflation
Yes
Yes
Yes
Yes
Check and adjust Brake
Yes
Yes
Yes
Yes
Check operation of all lighting
and horn devices. Replace
globes if necessary
Yes
Yes
Yes
Yes
Test Battery Capacity
Yes
Yes
Replace Wheel Baring Grease
Yes
Full Brake Pad Change over
Yes
Check condition and torque
settings of wheel nuts and
suspension forks
Yes
Yes