46
47
8. After successful connection, the LED indicator will stop fl ashing blue and
the added device will appear under “My Home” in the app. Continue with
“
Done
”.
Remark:
The LED indicator fl ashes blue quickly for up to two minutes in
connection mode. If the connection is not successful during that time, the smoke
alarm must be reconnected. Remove the battery for a short time and start again
from step two. Common problems include being out of range, or that you have
typed in the wrong Wi-Fi password by mistake.
5. Select the “
Network
” you want to use (it should be on the 2.4 GHz band).
Then, enter the “
Password
” of your Wi-Fi network and select “
Next
”.
6. To activate the smoke alarm and connect to Wi-Fi, hold down the test/
pause button for three seconds. The smoke alarm will beep once and the
LED indicator will rapidly fl ash blue.
7. Select “
Confi rm the indicator is blinking rapidly
” in the app, followed by “
Nex
t,”
and wait until the unit is located and connected.
06
05
07
08