times and the LED indicator will flash yellow 3 times every 60 seconds. This
end-of-life signal can be temporarily silenced for 22 hours by pressing the test button.
This end-of-life silence feature can only be used for a total of 30 days. After 30 days,
the end-of-life signal cannot be silenced. During this end-of-life silence period, your
alarm will continue to monitor for CO and provide protection as usual.
To help identify the date to replace the alarm, write down the date of first operation
on the dedicated label, located on the side of the alarm.
How to Set Up and Interconnect Wireless Alarms
All X-Sense Link
+
wireless interlinked alarms contain a built-in RF module that
enables you to wirelessly connect 2 or more interlinked alarms and create an
interlinked network. When one unit is triggered, all interconnected alarms will sound.
The X-Sense Link
+
series contain wirelessinterlinked smoke alarms,
wirelessinterlinked carbon monoxide alarms, and wirelessinterlinked smoke and
carbon monoxide alarms. This model is designed to be wirelessly interlinked with
other X-Sense Link
+
alarms, but is not designed to communicate with
wirelessinterlinked alarms from other manufacturers.
The X-Sense Link
+
wirelessinterlinked alarms in one multi-pack have already been
interconnected, and the alarms in each multi-pack have their own independent
interlinked network. If you have more than one multi-pack, you will need to connect
them all to the same network. Choose one multi-pack as your base network and
connect the other multi-packs to it.
NOTE! The following instructions regarding wireless interconnection are
to the X-Sense Link
+
wirelessinterlinked alarms only.
How to Interconnect
1.
Make sure you only work with 2 units at a time, and make sure that they are both
turned on to ensure successful connection.
NOTE: To turn on XC01-WR, pull out the battery insulating film from the
battery compartment. To learn how to turn on different models of wireless
interlinked alarms, please refer to their specific user manuals for more details.
2.
Quickly press the test/silence button on one of the 2 units 4 times; it will beep
once and the LED will flash red slowly, indicating it has entered pairing mode
and is waiting for a new unit to be added. Quickly press the test/silence button on
